What’s The Most Common Window Handle Replacement Debate Isn’t As Black And White As You Might Think

Choosing the Right Window Handle For Your UPVC Window

Selecting the correct window handle is vital to having a properly-fitting uPVC window. You’ll want a design that’s not just functional but also fits the aesthetic of your home.

Making changes to a uPVC window handle is very simple. It only takes just a few minutes and the following tools.

Metal

The handle for your window made of metal can be a beautiful accent and is an essential piece of hardware that can increase security in your home. A variety of metal window handles are available, which can be fitted to a variety of frames and materials. Some of these handles are designed specifically for sash windows, to make opening and closing the window more convenient and less likely jam. If you’re looking for a more secure alternative, there are various locking mechanisms designed to prevent the window from opening beyond a certain level.

The most common type of window handle that is used on UPVC is the epag handle. They have a mental spindle at the back that is connected to the frame of the window and controls the window mechanism. Both UPVC and aluminum windows come with them.

Cockspur handles are typically found on older UPVC window frames. They can be more difficult to use than modern Espag handles, as they have a traditional peg locking mechanism.

Cam handles are available to give a sleeker look. They have a sleek edge and are designed to fit with other types of uPVC windows. They are perfect for tilt and turn windows where you can open the window at the bottom, while being capable of opening the top.

When selecting new window handles, it is crucial to take into account a variety of aspects that include the height of the step and the direction in which the handle will be rotated. The former refers to the distance between the underside of the handle nose and the base of the screw plate, while the latter refers to which direction the handle will be able to turn. Some handles can only rotate in only one direction, like clockwise. Others are able to rotate in the opposite direction.

Plastic

There are many different types of window handles made of plastic. All are designed to operate a window and protect it from unwanted invaders. They can be installed on either uPVC or aluminium windows and are available in a variety designs and colors. Some are made with a lock that is built-in. This gives added security and allows you to leave the window open while protecting it from intruders.

Window handle problems can arise in a variety of situations. Sometimes, they might not be able to rotate properly. This could be because dust is able to penetrate the mechanism and causing dirt or a blockage. A common problem is when the window handle starts to stick or walk in a tight manner. This indicates that the window handle is in need of attention.

It is essential to contact an expert when this happens. They can help you resolve the issue quickly and efficiently. They can also provide assistance in replacing a window handle made of plastic with new ones that is more efficient and more reliably.

Regardless of the type of door handle replacements you’ve got the majority of manufacturers utilize the same fasteners. It’s therefore easy to change the window handle and lock by using the exact model.

It is important to understand the dimensions and style of your window prior to you look for a replacement handle. This will help ensure that you buy a handle that is perfect and won’t cause any issues with your existing windows. Also, be sure to take note of the spindle’s length – this refers to how far the handle extends from the base. This is essential when you are planning to utilize a window handle with a restriction.

Casement

Casement windows hinge at the top and bottom just like awning windows. However, they open horizontally to the left or the right, instead of vertically. They are easy to clean and offer a stunning view of your yard or garden, in addition to allowing fresh air in. They’re a popular option for new construction and can be an architectural feature to older homes as well. However, as time passes, they can become difficult to open or close due to worn-out hardware or damaged gears. In certain cases windows, a professional might need to replace the entire crank mechanism.

Casement windows or awning windows are usually equipped with the crank mechanism and roto gear to allow the window to open and shut. They also come with a locking mechanism that keeps the sash in position when closed. The window lock on a casement works in conjunction with the bezel locks on the frame to close the window. Unfortunately, many people overtighten the operating handle of a casement window. This can cause the locking mechanisms to work against one other, causing windows to become tangled and not open or close properly.

It’s also typical for the window crank handle to become stripped over time. This could happen when the window has been closed and opened several times over an extended period of time. This can also occur when the window is used as a prop while it’s open, causing its operating handle to rub on the crank shaft and gears.

Replacing a casement or awning window crank is a straightforward DIY window repair. It could save you money over time. You’ll first have to find the trim mounting screw that holds the casement cover (Photo 3). After removing the screws, you can remove the handle from the previous one and inspect the crank mechanism. The gears may be renewed lubricated, but if they’re already stripped, it’s the time to replace them.

Cockspur

Cockspur handles are typically found on older uPVC windows, as well as timber and aluminum. These handles are easy to operate, lock with the use of a key, and also provide an effective barrier against noise and cold from the outside. The handle opens up by pressing down on the lever and the cockspur nose closes over a wedge striker inside the frame to seal the window when closing. Replacing both the handle and cockspur wedge striker will make your double glazed window handles double glazed window handles windows much more efficient and can improve security.

The replacement cockspur window handles are available in right and left hand versions and operate by turning them 90 degrees. The handles come with a spur that presses against the PVC wedge of the window frame to secure the closing. The handles are easy to install and are available in a variety of finishes including white, satin chrome, and PVD gold.

It can be a challenge to determine the backset on the cockspur, particularly if you are replacing a handle that was previously used. This handle was designed to address this issue. It has 3 packers with different thicknesses that can be placed on the underside the handle’s nose.

The Schlosser Technik Apto is a high quality replacement cockspur handle which can be used in a variety of applications from 9mm to 21mm with flexible screw fixing centres. It is also key locking simple and easy to install and is available in a variety of finishes and comes with left and right hand versions.

This cockspur handle is designed to fit tilt and turn double glazed windows handles, but not side-opening casement windows (which use a separate pivot and tilt). It can be used to replace upvc window handle older or damaged handles on uPVC or aluminium frames by using rivets rather than screws – the only difference being the method of attachment. The handle can be fixed to your window frame by using the use of a rivet gun.

Espagnolette

Espagnolette window handles, also known as shootbolts or espagnolette locks are the locking mechanism that connects to the multi-point lock system in your uPVC windows. They are commonly found in older homes and offer both aesthetics and security. Espagnolette handles are available with key-locking or nhcmall.co.kr non-key-locking mechanisms and come in both inline and crank styles. They can be straight or curved. The key-locking button adds an additional layer of protection, as it prevents the handle from being opened from the outside with a thin screwdriver stuck between the frames. This is a common burglary technique!

There’s a vast selection of espagnolette handles you can pick from here at GB DIY Store. It is essential to determine the size of the spindle of the handle you currently have before ordering the replacement. Once you have done this, you can browse through our selection of espag replacement handles to find the perfect design for your windows.

We have a wide collection of white uPVC inline espagnolette handles available in both key-locking and not-key-locking versions. They are available in a variety of colours and spindle lengths, so you can match the new handles to your existing window frame and décor. Our collection of espagnolette handles includes contemporary and contemporary styles, as also classic designs, and each replacement handle comes with a five different magnetic spindle lengths that can be swapped between 15mm and 55mm, making it easy to fit the handle to your window without needing to purchase an exact size screw!

A clever rosette on the back of the rose ensures the spindle only fits in the right spot and is only inserted by using the left or right hand lever, which will prevent any accidents. A metal spindle insert also helps to hold the espagnolette handle in place, and the handle is held in place by a clever ‘click-fit’ mechanism that is activated when the handle is turned by hand to reveal an audible ‘click’.