Repairs To Upvc Windows: What No One Has Discussed

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace and typically fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you’ll need to source some plastic spacers that will help the new pane to fit properly into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass so that any fragments of glass fall onto the cloth instead of onto the floor where they could be trampled on and cause further damage.

Once the glass has been removed and the glass is removed, it’s a good idea to cover the gap with packaging tape or duct tape to stop water and Upvc repairs near me drafts from getting into the property until a professional is able to come out and repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sliding. A sagging window in uPVC can cause problems with light, draughts and even security. It is crucial to act immediately if you discover that your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you’ll need open the window to get to the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you’re satisfied with the fit of your window, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have become undone over time, but it can be due to the mechanism of the handle getting worn out. Fortunately, it’s easy to fix a loose uPVC window handle yourself. First, you’ll need to close the window and then perform a test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it doesn’t then you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it’s important to take action. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on how severe the issue is, the old caulking may have to be removed. When it is time to uPVC repair, you must avoid over-caulking. This will only make your window more difficult to clean and reduce its energy efficiency.

Check that any drainage holes do not have debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more serious situations, you might have to consider replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the issue is related to the seal, not the frame. This can be easily fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your upvc Repairs Near me windows are difficult to open, or slack and open with ease It could be the hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. Changing a window hinge is an easy process, but it’s simpler with someone else to assist in holding the frame in place.

Check that the uPVC hinges are closed and open in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause a gap to form where the sash joins the frame. They can be repaired by giving them good cleaning, but when they’re beyond repair, it could be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window and can also become misaligned, again it is possible to just give them a clean but in some instances it could be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures and decrease the possibility of draughts.

One of the most effective ways to cut down on drafts is to use a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it could be cheaper to replace them than to repair them. If you have any problems with your upvc window you should consult an expert as soon as you can.